Description of 12 Core Aerial Fiber Cable
Aerial Fiber Cable also Called the ASU cable.Aerial Fiber Cable is a lighter and more affordable alternative to ADSS cable,The single loose tube design made the cable with lighter weight the two FRP strength providing the good Mechanical performance, easy for installation So that it is getting more and more popular from the ISP company,Strength Member:FRP,Fiber cores:4~12 Core Fiber is Optional,Span:80M ASU Cable,Cable MAT Short Term:1.4KN,Max. crush resistance (Short term):1000 N/100mm,Min. bending radius (Installation):25 times the cable diameter,Min. bending radius (Operation):15 times the cable diameter,Installation Temperature:-10℃ ~ +60℃.
of 12 Core Aerial Fiber Cable
■
|
|
|
|
|
Max. crush resistance |
1000 N/100mm |
|
|
Min. bending radius |
25 times the cable diameter |
|
|
15 times the cable diameter |
||
|
-30℃ ~ +70℃ |
||
|
-10℃ ~ +60℃ |
||
|
-30℃ ~ +70℃ |
■
|
|
|
|
|
IEC 60794-1-2- E1 |
Length of cable: about 50m Load time>=1 min |
Fiber strain <= 0.33%. Loss change <= 0.1dB@1550nm after test. No fiber break and no sheath damage. |
|
Crush Test IEC 60794-1-2-E3 |
Load: Short term crush Load time: >= 1min |
Loss change <= 0.1dB@1550nm after test. No fiber break and no sheath damage. |
|
Impact Test IEC 60794-1-2-E4 |
Radius: 300 mm Points of impact: 3 Times of per point: 1 Impact energy: 10J |
Loss change <= 0.1dB/km@1550nm. No fiber break and no sheath damage. |
|
60794-1-2-E6 |
Bending radius: 20 x OD No. of cycle: 10 |
Loss change <= 0.1dB/km@1550nm. No fiber break and no sheath damage. |
|
IEC 60794-1-2- E7 |
Length: 1m Twist angle: ±90℃ No. of cycle: 10 |
Loss change <= 0.1dB/km@1550nm. No fiber break and no sheath damage. |
|
Cable bend IEC 60794-1-2-E11 |
Diameter of mandrel:20 x OD -Number of turns:10 -Number of cycles:5 |
Loss change <= 0.1dB/km@1550nm. No fiber break and no sheath damage. |
|
60794-1-2-F5 |
Height of water: 1m Sample length: 3m Time: 24h |
No water leak from the cable core of the opposite end. |
|
60794-1-2-F1 |
Temperature: -30℃~+70℃ Time of each step: 12h Number of cycle: 2 |
Loss change <= 0.1dB/km@1550nm. No fiber break and no sheath damage. |
■
1 Each single cable length been wound on an iron stand-wooden composite or pure wooden drum.
2 Standard drum length is 4000m/5000m with ±2%,other length is also available.
3 At least 3m of cable inner end should be reserved for testing.
4 Covered by plastic buffer sheet.
5 Sealed by strong wooden battens.
Популярни тагове: 12 core aerial fiber cable, China 12 core aerial fiber cable manufacturers, suppliers, factory
